Lab4PLC Basic - Professional PLC training system, PLC manufacturer independent, DI=8, DQ=8, AI=4, AQ=4
Lab4PLC Basic is a professional PLC / SPS Trainer for the use of different PLC controls, PLC manufacturer independent (Controllino, Siemens e.g. Simatic S7-300, S7-1200 or S7-1500, Beckhoff, Bosch Rexroth, Phoenix Contact, Eaton, Schneider, Moeller and many more).
The exercise model is created visually on the Whiteboard. Standard exercise models such as conveyor belt, elevator or sorting system can be displayed as well as air conditioning, heating control or level monitoring!
Changes or extensions of the exercise model in function and scope can be presented flexibly and agilely. With the professional Lab4PLC System you can reproduce the desired exercise model uncompromisingly.
The magnetic sensors (switches or analog voltage transmitters) and actuators (LED or analog voltage display) can be placed on the Whiteboard as required and connected to the Lab4PLC System.
The Lab4PLC systems can also be used with the integrated stake and an iron foil with whiteboard function at a workplace.
Thus nothing stands in the way of industry and application independent simulation of exercise models.
Suitable for training and further education, Chamber of Industry and Commerce exam preparation, ideal for "learning by doing".
All fields of application of education and training in schools, studies and professions can be covered.
Technical data:
System:
|
Lab4PLC Basic
Constructed with aluminum system profiles, suspension for Whiteboard, integrated stake for use at the workplace
|
PLC manufacturer:
|
Controllino, Siemens Simatic, Beckhoff, Bosch Rexroth, Phoenix Contact, Eaton, Schneider, Moeller and many more!
> Suitable for PLC controls with an operating voltage of 12 or 24 volts, max. mounting surface: W=380 mm x D=205 mm
|
Power supply:
|
12 or 24 Volt plug switching power supply (Please specify desired voltage when ordering)
|
Digital
Inputs:
|
max. 8
|
Digital
Outputs:
|
max. 8
|
Analog
Inputs:
|
max. 4
|
Analog
Outputs:
|
max. 4
|
Switch:
(Sensor)
|
6 x Sensor Switch (push-button or latching action, normally open or normally closed function switchable)
|
Value:
(Sensor)
|
1 x Sensor Value - Analog value transmitter (0 - 10 Volt)
|
LED:
(Aktor)
|
4 x Aktor LED (yellow)
|
Display:
(Aktor)
|
1 x Aktor Display - Analog value display (0 - 10 Volt)
|
Width:
|
420 mm
|
Height:
|
860 mm
|
Depth:
|
80 mm (without PLC)
|
Required
extensions: |
PLC control, Whiteboard (with metal surface min L=140 cm x H=90 cm) or metal foil with Whiteboard function, Whiteboard pens + cleaner
|
Scope of delivery:
1 x
|
Lab4PLC Basic
|
1 x
|
Plug switch power supply: 12 or 24 Volt
|
6 x
|
Sensor – Switch (push-button or momentary action, switchable normally open or normally closed)
|
1 x
|
Sensor – Value (Analog value transmitter 0 - 10 Volt)
|
4 x
|
Aktor – LED (yellow)
|
1 x
|
Aktor – Display: (Analog value display 0 - 10 Volt)
|
12 x
|
Connection cable Lab4PLC to the sensors/actuators, each 2 meters
|
1 x
|
A USB Stick with technical documentation and over 30 sample task descriptions (documentation in English)
|
System requirements:
Suitable for PLC controls with an operating voltage of 12 or 24 volts, max. mounting surface: W=380 mm x D=205 mm
Note:
Not included in delivery: PLC control, Whiteboard (with metal surface min L=140 cm x H=90 cm) or metal foil with Whiteboard function, Whiteboard pens + cleaner
