The Plant model "Level Monitoring" represents the monitoring of a filling level. The interface module can be plugged onto the 40-pin "Interface" pin header on all "Trainingsboards".
With the respective program, a Level Monitoring can now be programmed and tested live. The filling level is performed manually.
The plant model "Level Monitoring" can be used with all "PLC4Training Trainingsboards".
Technical data:
Sensors/Inputs
4 SMD pushbuttons, connected with 4 inputs of the used PLC
4 micro switches, connected with 4 inputs of the used PLC
for detection, filling level at 10%, 85%, 95% and overrun
Actuators/Outputs
2 LEDs to display the pump used for filling
1 LED to indicate emergency stop
Other
Power is supplied via the "Trainingsboard".
The "Level Monitoring" module can be operated with 12 to 24 volts.
The "Level Monitoring" module is plugged into the 40-pin "Interface" pin header of the "PLC4Training Trainingsboard".
Scope of delivery
Interface module - "Level Monitoring" (L x W x H) approx. 96 x 96 x 25 mm
Task description as PDF
Sample solution
