The "Logo8-Extension Module for AM2" can be connected to the "Logo8-Trainingsboard" and provides 2 additional analog inputs. The two analog inputs (0-10 volts) of the first AM2 module are available on the "Logo8-Trainingboard" on the 40-pin "Interface" connector. From there, they can be used on with the "Interface Module 1" in external models.
Technical data:
Sensors/input
2 analog inputs 0-10 volt
(the inputs of the first "Logo8-Extension Module for AM2" are present at the 40-pin "Interface" plug on the "Logo8-Trainingsboard")
Actuators/outputs
No
More
Power supply via the "Logo8-Trainingboard"
The "Logo8-Extension Module for AM2" is mounted on an aluminum bracket.
Note
The "Logo8-Extension Module for AM2" is suitable for the following Logo! Analog Module:
Logo! AM2 (manufacturer part number: 6ED1055-1MA00-0BA2)
Scope of delivery
"Logo8-Extension Module for AM2" mounted on aluminum bracket
size with aluminium bracket and Logo! AM2 Module (L x W x H) approx. 35.5 x 170 x 110 mm
Connection material (for the connection of the aluminium brackets of "Logo8 Trainingboard" and "Logo8-Extension Module)
Set of cables for wiring the Logo! AM2 module
Note
The Logo! AM2 module is not included in the delivery!
