The "Logo8-Extension Module for DM8" is associated with the "Logo8-Trainingsboard" and provides 4 additional digital inputs and 4 additional digital outputs. The outputs of the first "Logo8-Extension Module for DM8" are connected to 4 LEDs on the "Logo8-Trainingboard". The 4 inputs and 4 outputs of the first "Logo8-Extension Module for DM8" are also associated with the 40-pin "Interface" connector on the Logo8-Trainingsboard. From there, they can be used on the "Interface Module 1" for external models.
Technical data:
Sensors/input
4 inputs
(the 4 inputs of the first "Logo8-Extension Module for DM8" are located on the 40-pin "Interface" plug on the "Logo8-Trainingboard")
Actuators/outputs
4 outputs
(the 4 outputs of the first "Logo8-Extension Module for DM8" are located on the 40-pin "Interface" plug on the "Logo8-Trainingboard"))
More
The power supply is via the Logo8-Trainingboard.
The "Logo8-Extension Module for DM8" is mounted on an aluminum bracket
Note
The "Logo8-Extension Module for DM8" is for the following Logo! Digital Module suitable:
Logo! DM8 12/24R (manufacturer part number: 6ED1055-1MB00-0BA2)
Scope of delivery
Logo8-Extension Module mounted on aluminum bracket
size with aluminum bracket and Logo8 Module: (L x W x H) approx. 35.5 x 170 x 110 mm
Connection material (for connecting the both aluminium brackets of Logo8-Trainingboard and Logo8-Extension Module)
Set of cables for the wiring of the DM8 Logo Module
Note: The Logo! DM8 12/24R module is not included in the delivery!
