The "Logo8-Trainingboard" from PLC4Training.com is suitable for learning, testing and simulating different with LOGO!Soft Comfort created programs. To do this, the created programs can be transferred and tested with different sensors and actuators on the "Logo8-Trainingboard". Each function can be simulated in detail and tested -> learning by doing.
The "Logo8-Trainingboard" is developed for the Module Logo! 8 12/24 RCE . This Logo! 8 Module supports a variety of different inputs and outputs and is therefore excellently suited for testing and training environments.
The included Training Card system for the Logo8-Trainingboard supports the creation of LOGO!Soft Comfort program up to testing and verifing the functionality. The available sensors on the Logo8-Trainingboard can be switched on or off depending on the requirements . Available Sensors are up to 8 push / latching switches, 4 analogue value transmitter (0-10 volts), or a pulse generator (0-1000 Hz, linear). 4 LEDs are used as actuators, one can be used also with a beeper. 4 additional LEDs can be used with a "Logo8-Extension Module for DM8" (separately available) on the "Logo8-Trainingboard".
The "Logo8-Trainingboard" has a 40-pin Interface connector. This Connector is used to attach extensions such as the "Traffic Light" (separately available) or the connection of the "Interface Modules 1" (available separately). On the "Interface Module 1" the Input and Outputs can be connected via spring terminals for external use. For example, external models can be controlled.
"Logo8-Extension Modules for DM8, AM2 or AM2 AQ" can be laterally connected to the "Logo8-Trainingboard". These Extension Modules are currently available for the extension modules DM8, AM2 and AM2 AQ
. The inputs and outputs of the first connected modul are wired also with the 40-pin Interface connector. This means, on the Interface connector you can use at most from the first DM8 Module additional 4 inputs and 4 outputs, from the first AM2 Module two additional analog inputs (0-10 volts) and from the AM2 AQ two additional analog outputs (0-10 volts).
Technical data:
Sensors/Input
8 push button / latching switch for simulation of input signals
(to be used as switches or buttons, simulating break contact or closing contact)
4 analog inputs for simulation of analog sensors with 0-10 volt
(The analog inputs can be alternatively connected via 4 switches to the Logo8 inputs)
1 pulse generator to simulate the fast counter inputs
(The pulse generator can be alternatively connected via a switch to a Logo8 input)
Actuators/Outputs
8 LEDs indicating status of the outputs
4 LEDs are connected with the Logo! 8 12/24RCE
4 more LEDs can be used with a "Logo8-Extension Module for DM8" (can be ordered separately)
1 signal transmitter
The signal transmitter can be switched on alternatively to a Logo8 output
Additionally
1 placeholder for Training Cards
Training Cards illustrate the use of sensors and actuators.
1 power supply
The Logo8-Trainingboard can be operated with voltages between 12 ... 24 V DC.
1 LED for voltage monitoring
the LED indicates a sufficient power supply in the range of 12... 24 volt
1 interface connector 40 pin
for connecting "Interface" modules, for example Traffic Light or "Interface Module 1"
Connectors for the connection of " Logo8-Extension Modules for DM8, AM2, AM2 AQ"
("Logo8-Extension Modules" are connected to the Logo8-Trainingboard on the right side and secured with screws)
1 voltage output for supplying an external display
(the power supply of "Logo8-Trainigsboard" has to be selected accordingly)
The Logo8-Trainingboard is mounted on an aluminum bracket.
Note
The Logo8-Trainingboard is suitable for the following PLC:
Logo! 8 12/24 RCE (manufacturer part number: 6ED1052-1MD00-0BA8)
or
Logo! 12/24 RCE (manufacturer part number: 6ED1052-1MD08-0BA0)
The Logo8-Trainingboard can be operated with a power supply between 12... 24 volt
please observe in any case the required voltage for which "Logo8-Extension Modules for DM8, AM2, AM2 AQ" or any third-party models.
Scope of delivery
Logo8-Trainingboard mounted on aluminium bracket
size with aluminium bracket and Logo! 8 Module 12/24 RCE: (L x W x H) approx. 250 x 170 x 110 mm
Set of cables for wiring the Module Logo! 8 12/24 RCE
Note: The Logo! 8 12/24RCE is not included in the delivery!
Plug power supply
universal input 90-264 VAC, output 12V/630mA, 7,5 Watt, high efficiency and low StandBy consumption, overload and short-circuit protected
USB stick contains
technical manual as PDF
Task descriptions as PDF
Sample solutions as a LOGO!Soft Comfort functional plan, approximately 40 pieces
(Partially a Trainings Card contains multiple tasks or there are several solutions for a task)
30 training cards
suitable for the task descriptions, tasks divided in 3 levels of difficulty
Attention
The "
Logo8-Trainingsboard - Starter Kit" comes without Logo! 8 12/24 RCE
The "Logo8-Trainingsboard - Starter Kit" is suitable for the following PLC:
Logo! 8 12/24 RCE (manufacturer part number: 6ED1052-1MD00-0BA8)
or
Logo! 12/24 RCE (manufacturer part number: 6ED1052-1MD08-0BA0)
