The "PLC-Extension Module for 6AE1" can be connected to the "easy-Trainingsboard" and provides 2 additional analog inputs and outputs. The two analog inputs and outputs, each 0-10 volts, of the first easyE4 6AE1 module are available on the "easy-Trainingsboard" on the 40-pin "Interface" connector. From there, they can be used with the "Interface Module 1" for external sensors and actuators or in external models.
Technical data:
Sensors/input
2 analog inputs 0-10 volt
(the inputs of the first "PLC-Extension Module for 6AE1" are present at the 40-pin "Interface" plug on the "easy-Trainingsboard")
Actuators/outputs
2 analog outputs 0-10 volt
(the inputs of the first "PLC-Extension Module for 6AE1" are present at the 40-pin "Interface" plug on the "easy-Trainingsboard")
More
Power supply via the "easy-Trainingboard"
The "easy-Extension Module for 6AE1" is mounted on an aluminum bracket.
Note
The "PLC-Extension Module for 6AE1" is suitable for the following EATON easyE4 Analog Module:
EATON Easy E4 DC 6AE1 (manufacture number: 197223)
Scope of delivery
"PLC-Extension Module for 6AE1" mounted on aluminum bracket
size with aluminium bracket and easy Module (L x W x H) approx. 35.5 x 170 x 110 mm
Connection material (for the connection of the aluminium brackets of "easy Trainingboard" and "PLC-Extension Module)
Set of cables for wiring the EATON easyE4 module
Note
The EATON easyE4 module is not included in the delivery!
