The "PLC-Extension Module for 8TE1/8RE1" is associated with the "easy-Trainingsboard" and provides 4 additional digital inputs and 4 additional digital outputs. The outputs of the first "PLC-Extension Module for 8RE1/8TE1" are connected to 4 LEDs on the "easy-Trainingsboard". The 4 inputs and 4 outputs of the first "PLC-Extension Module for 8RE1/8RE1" are also associated with the 40-pin "Interface" connector on the easy-Trainingsboard. From there, they can be used on the "Interface Module 1" for external models.
Technical data:
Sensors/input
4 inputs
(the 4 inputs of the first "PLC-Extension Module for 8RE1/8TE1" are located on the 40-pin "Interface" plug on the "easy-Trainingsboard")
Actuators/outputs
4 outputs
(the 4 outputs of the first "PLC-Extension Module for 8RE1/8TE1" are located on the 40-pin "Interface" plug on the "easy-Trainingsboard"))
More
The power supply is via the easy-Trainingsboard.
The "PLC-Extension Module for 8TE1/8RE1" is mounted on an aluminum bracket
Note
The "PLC-Extension Module for 8TE1/8RE1" is for the following EATON easyE4 Modules suitable:
Easy-E4-UC-8RE1 (manufacturer number: 197217
or
Easy-E4-DC-8TE1 (manufacturer number: 197219
Scope of delivery
PLC-Extension Module mounted on aluminum bracket
size with aluminum bracket and easy Module: (L x W x H) approx. 35.5 x 170 x 110 mm
Connection material (for connecting the both aluminium brackets of easy-Trainingsboard and PLC-Extension Module)
Set of cables for the wiring of the EATON easyE4 Module
Note: The EATON easyE4 8TE1/8RE1 module is not included in the delivery!
