The plant model "Transport Belt" represents the simulation of a conveyor belt. The interface module can be plugged onto the 40-pin "Interface" pin header on all "Trainingsboards".
With the respective program, a conveyor belt can now be programmed and tested live. The movement of the conveyor belt is performed manually.
The plant model "Transport Belt" can be used with all "PLC4Training Trainingsboards".
Technical data:
Sensors/Inputs
5 SMD pushbuttons, connected with 5 inputs of the used PLC
2 light barriers, connected with 2 inputs of the used PLC
for detection, band end left and right
Actuators/Outputs
2 LEDs for indication of transport direction to the left or to the right
1 LED to indicate emergency stop
Other
Power is supplied via the "Trainingsboard".
The "Transport Belt" module can be operated with 12 to 24 volts.
The "Transport Belt" module is plugged into the 40-pin "Interface" pin header of the "PLC4Training Trainingsboard".
Scope of delivery
Interface module - "Transport Belt" (L x W x H) approx. 96 x 96 x 25 mm
Task description as PDF
Sample solution
